Universal Plus MiniPanel
An exceptional visual feature of the MiniPanel line is its design with a stylish white panel and a grey handle attached to the front column.
The rack is composed of such elements as a steel frame, columns, two crossbars and forks mounted on the crossbars. There are two possible types of crossbars. The first one is designed to hold forks for skis, whereas a more complex construction of the second type enables the storage of ski poles. Each ski fork is coated with a special anti-slip rubber paint and can accommodate up to three pairs of skis. Forks for poles are in the form of specially designed two steel arms between which it is possible to store up to four pairs of poles. Height-adjustable horizontal crossbars enable the storage of skis and poles of different sizes and give the possibility to freely arrange forks on the crossbars, which results in an exceptional functionality and capacity of this rack. When the winter season is over, ski forks can be easily replaced with forks for bikes.
Rack elements exposed to corrosion are made of powder coated galvanized steel.
- large capacity for skis and poles storing on two height-regulated crossbars
- special construction of pole forks for storing 4 pairs of poles each
- ski forks covered with anti-slip rubber coat holding up to 3 pairs of skis each
- option to exchange ski forks for snowboard and bicycle forks
- made of powder-coated galvanized steel
|1500 mm||800 mm||2420 mm||45 + 124|
|1800 mm||800 mm||2420 mm||54 + 156|
|2000 mm||800 mm||2420 mm||63 + 172|
|2400 mm||800 mm||2420 mm||81 + 212|
|3000 mm||800 mm||2420 mm||99 + 268|
|4000 mm||800 mm||2420 mm||126 + 344|
*calculated for an average width of carving skis and assuming that the poles are stored on one side of one of the two crossbars (pairs of skis + pairs of poles)
|1500 mm||800 mm||2420 mm||30 + 248|
|1800 mm||800 mm||2420 mm||36 + 312|
|2000 mm||800 mm||2420 mm||42 + 344|
|2400 mm||800 mm||2420 mm||54 + 424|
|3000 mm||800 mm||2420 mm||66 + 516|
|4000 mm||800 mm||2420 mm||84 + 688|
*calculated for an average width of carving skis and assuming that the poles are stored on both sides of one of the two crossbars (pairs of skis + pairs of poles)